- Lip and weir edge should be kept clean.
- Avoid sitting under trees (leaves and twigs).
- Try to protect from wind.
- Ensure pump is correctly sized.
| Noise | : | Good |
|---|---|---|
| Visibility | : | Good |
| Splash/Mist | : | Poor |
| Wind Stability | : | Poor |
| Aeration Quality | : | Poor |
-
DESIGN / APPLICATION DATA: A curtain of water tumbling down to form a waterfall can have varying widths and heights. As the thickness of the water lm depends on these two factors. So will the quantity of water that the pump is required to circulate. Water is pumped by a concealed unit from a lower basin, through one or more pressure lines, into a trough with a shaped overow, the width and height of which determine the pattern of the waterfall. Most arrangements require an adjustable lip at the beginning of the overow and a “weir” edge on the other side. With wide waterfalls, the lip should be adjusted perfectly level to prevent the water film from breaking up. It is also important that leaves and dirt do not collect on either the “fall-away” or lip, IMPORTANT:
Note : As per customer requirements, we supply in all sizes & designs. -
DESIGN/ APPLICATION DATA This Jet is preferred and popular solutions for dry deck fountains. Jet coming with constant flow (Not programmable) and made from Stainless steel. It is designed to be safe walk on top as it is absolutely flat. Can be adjust up to 5 degree from center line. This jet is easy to maintain incorporates a nozzle and a circular light ready to install unit. Available with 4 different interchangeable nozzle options. SPECIFICATION DATA Material of construction is Stainless steel 316. LIGHTING: Circular LED light 12V DC x 18W. -
Dandelion PF-6000 Series Sphere & Hemi Sphere Effect Nozzle
DESIGN / APPLICATION DATA: The Dandelion Hemisphere effect is created by multiple discs of water at the radiating from a center manifold. These effects produce a ne spray that results evaporation cooling in the area of the effect. When not in use as a water feature, the dandelion hemisphere appears sculpture ideal for mall and garden area. SPECIFICATION DATA: Material of construction is cast bronze and precision machined brass Nozzles are easily cleaned individually adjustable (for water thickness) and removable. OPERATING DATA:Noise : Good Visibility : Excellent Splash/Mist : Excellent Wind Stability : Poor Aeration Quality : Good -
Aerated Jets PF-4000 Series Foam Effect Nozzles
DESIGN / APPLICATION DATA: Aquascape Aerated Jet Nozzles are injection Nozzles that are independent on the water level. Become of the injection effect the surrounding air is sucked in, intensively mixed and thrown high into the air by the injector jet Aerating. Jet Nozzles are designed to produce columns of highly aerated water with a frothy effected. SPECIFICATION DATA: Material of construction is brass pipe with cast bronze inlet. OPERATING DATA:Noise : Moderate Visibility : Excellent Splash/Mist : Low to Moderate Wind Stability : Good Aeration Quality : Good -
DESIGN / APPLICATION DATA: A column of frothy, aerated water, recommended for small and medium displays in shallow pools. Beautiful when lighted. Jet has low profile and neat appearance. No constant water level is required. SPECIFICATION DATA: Material of construction is Stainless Steel 316, brass & ABS plastic composed. OPERATING DATA:Noise : Moderate Visibility : Excellent Splash/Mist : Low to Moderate Wind Stability : Good Aeration Quality : Good -
DESIGN / APPLICATION DATA: A column of frothy, aerated water, recommended for small and medium displays in shallow pools. Beautiful when lighted. Jet has low profile and neat appearance. No constant water level is required. SPECIFICATION DATA: Material of construction is Stainless Steel and brass with internal air/water ration adjustment. Exterior is Stainless Steel. OPERATING DATA:Noise : Moderate Visibility : Excellent Splash/Mist : Low Wind Stability : Good Aeration Quality : Good -
DESIGN / APPLICATION DATA: Aquascape PF 3400 series Aerating Jets are made from cast bronze, brass and Stainless steel. The unique water level independent and Flow Adjustable Aerating Jets are for installation above water level the complete Jet has to be above water level. SPECIFICATION DATA: Material of construction is cast bronze and brass with internal air/water ratio adjustment. OPERATING DATA:Noise : Good Visibility : Excellent Splash/Mist : Low to Moderate Wind Stability : Excellent Aeration Quality : Excellent -
DESIGN / APPLICATION DATA: The Cascade nozzles produce a graceful conical shaped while display. The water level dependent aerated display is suitable for clam to light wind conditions. Exhibits excellent light reecting properties. Because of the injection effect, the surrounding water and air are sucked in, intensively mixed and thrown high in to the air by the injector jet. However the water pattern changes with varying water levels, when below the standard water level the jet is thinner but also higher , when above it is fuller but also lower, when the waves become stronger the fountains begin to dance. Often seen as a very interesting special effect. Note: Return valve must be provided in installations with different water levels, otherwise when switching off the water level since to the injection height. SPECIFICATION DATA: Material of construction is machined cast bronze natural nish. OPERATING DATA:Noise : Good Visibility : Very Good Splash/Mist : Moderate Wind Stability : Excellent Aeration Quality : Excellent -
DESIGN / APPLICATION DATA: A column of frothy, aerated water, recommended for small and medium display. Jet has low prole and neat appearance. No constant water level is required. Fountain installations with a lower water deserver, this nozzle type has a wide eld of application. SPECIFICATION DATA: Material of construction is cast bronze and brass with internal air/water ration adjustment. Exterior is of Bronze. OPERATING DATA:Noise : Moderate Visibility : Excellent Splash/Mist : Low Wind Stability : Good Aeration Quality : Good -
DESIGN / APPLICATION DATA: Aerating Jet nozzles are designed to produce columns of highly aerated water with frothy effect. High light reection characteristic of scream is ideal for lighted fountain. The aerating jets are made of cast bronze and brass stock, machined to close tolerance. The inner nozzle has an internal tapered bore. Water and air suction ratio can be adjusted in this nozzle due to special design. SPECIFICATION DATA: Material of construction is cast bronze with brass pipe. OPERATING DATA:Noise : Good Visibility : Excellent Splash/Mist : Good Wind Stability : Good Aeration Quality : Excellent -
DESIGN / APPLICATION DATA: Jet Cluster nozzles produces a vertical columns of water using connection rows of clear stream jet giving the appearance of a large diameter water columns. Due to the refractive quality of the individual streams, jet cluster nozzles offer good visibility at the long range viewing distance. Nozzle is further enhanced when combined with submersible lighting. Applications include indoor or shielded outdoor use in commercial, institutional, municipal building and landscape projects, as a primary display features, or as peripheral accents to primary display features they are also used effectively in series or grouped in clusters. SPECIFICATION DATA: Material of construction is machined brass and bronze. Female threaded connection. OPERATING DATA:Noise : Low to Moderate Visibility : Good Splash/Mist : Low to Moderate Wind Stability : Good Aeration Quality : Good -
DESIGN/APPLICATION DATA: Aquascape Foam Geyser Nozzles are designed to provide in their lowest spray heights white mounds of water. While at greater spray height, to provide highly visible uffy white spray effect.
SPECIFICATION DATA: Material of construction is cast bronze with copper pipe. OPERATING DATA:Noise : Good Visibility : Excellent Splash/Mist : Low to Moderate Wind Stability : Excellent Aeration Quality : Excellent