-
-
-
-
-
-
The PROHEAT II CHILLER is used for heating swimming pools even with 0ºC in air, extending the swimming season. • Robust, lightweight casing in Alu-minium and Magnesium sheet anti-corrosion, Aluminium structure. Not degradable color. • High performance evaporator coil made of copper tube and lacquered aluminium fins, especially for corro-sive environments. • Axial fans. • Compressor Scroll. • Titanium condensers made of Tita-nium G2 and PVC against corrosion. • Refrigerant Gas R-410-A. • High and Low pressure switches (HP/LP). • Expansion by thermostatic valve with external balancer. • Reversible cycle for defrosting by 4-way valve. • Dry filter bidirectional. • Water circuit made of PVC with wa-ter flow switch. • Filter pump control. • Automatic electrical protections. • Easy-to-use control panel, with display of current temperature, set-point and alarm messages. -
PROHEAT II heat pump air/water is suitable for outdoor pools. It will allow you to extend the use of the pool in the summer season. • Robust, lightweight casing made from corrosion-resistant magnesium coated aluminium. • High performance evaporator battery in an inner corrugated copper tube with lacquered aluminium fins, especially for corrosive environments. • Axial ventilator. • Scroll compressor. • Water condensers in G2 titanium. Guaranteed against corrosion. • R-410A refrigerant gas. • Expansion by thermostatic valve with external balancing unit. • High and low pressure switches. • Flowmeter for controlling condensation. • Reverse cycle defrosting with 4-way valve. • Control of purifying system. • Electrical protection for handling and strength. • Easy-to-use control panel with current temperature display and set point, and alarm notifications. Communication protocols are available. -
• The AQUA Titan Optima can be easily operated using the control panel touch screen. • The inlet manifold has been designed to minimise flow imbalance between the flow tubes, greatly reducing the risks of air locking. Safety and equipment protection is provided by a flow switch, with over-heating prevented by one auto-reset against enclosure over-temperature and one manual -reset thermal safety cut out. • The digital control board allows accurate control of pool water temperature thanks to its high precision. The blue digital characters on the touch screen are clearly legible, even in bright sunlight. • To reduce voltage drop on start-up, the heater element banks are energised in a staged cascaded sequence, with a time delay between energising each bank. • Heating Elements: Titanium, high MgO compaction • Flow tubes: BS 316L stainless steel (Titan Optima) or pure titanium (Titan Optima plus) • Cladding panels: Moulded aluminium, epoxy powder coated • Contactors: Cascade wired dual Schneider contactors for each element bank • Thermostats: – 1 x 65° C safety thermal cut out (auto reset) against enclosure over-temperature -1 x 55° C safety thermal cut out (manual reset) • Flow switch: Gold tipped reed switch with titanium fulcrum pin • Wiring: High temperature, silicone sheathed, multi-strand copper conductors • Seals: High temperature special formula EPDM • Water connections: 63 mm spigot with adaptor for 2″ or 63 mm • Working pressure: 4 bar maximum • Mounting: Floor or wall mounting (wall bracket supplied) -
• Ideal for heating, cooling, heat-recovery, condensing and evaporation processes. • High overall heat transfer coefficient for efficient heat transfer. • Compact design gives maximum surface area to material volume without compromising mechanical robustness. • Low installation cost. • Easy dismantling for rapid cleaning. • High performance with low hold-up volume. • Versatile, modular design. • Plate and gasket materials available to suit most fluid types • Standard units available from stock: 100-kW to 819-kW for heating applications; 53-kW to 397 kW for cooling applications. • Short lead-time custom build service. • The Plate heat exchangers comprise an epoxy coated steel frame consisting of one removable and one fixed cover fitted with top and bottom plate hangers. • The fluid connections are heavy gauge, stainless steel, male threaded nozzles welded into the front cover. • Flanged connections are available on request. • The heat transfer plates are corrugated in a herringbone pattern with port holes for the passage of the two fluids and have clip on re-usable seals. • Plate materials available: Titanium (standard), BS 316L Stainless Steel, Hastelloy Alloy, Nickel. • Seal materials available: EPDM (standard), HNBR, NBR, NEOPRENE. • Maximum working pressure: 0.6-MPa. • Maximum operating temperature: 150°C. -
• The Optima Compact is designed and manufactured to the highest specifications. Compact in design, robust, durable and ultra-reliable, this heater is made to last, providing you the perfect pool temperature with easy to use controls. • Exceeds all known Global standards for safety and reliability • Easy operation using the analogue control thermostat with 1°C differential • Silent Operation • Stay-clean vortex inducing Titanium heating elements • Optima Compact Plus model available with pure titanium flow tube and heating elements for salt water content higher than 8000PPM • Dual cascade wired Schneider contactors • Time clock operation • No servicing required • 100% operational efficiency throughout product life • The heater’s outlet manifold accommodates a flow switch, with gold tipped reed, that provides a signal to the control board for ultimate reliability and safety; whilst the inlet manifold has been designed to eliminate the risk of air locking. Over-heating is prevented by a manual-reset thermal safety cut-out. • Floor or wall mountable: the heater can be vertically wall-mounted using the supplied bracket, or free-standing on the floor using the footed base. • 3-year warranty
-
AQUA Indoor Environmental Control Systems provide effective control of damaging moisture common with indoor pool facilities. They maintain a delicate balance of humidity control and manage air and water temperatures fo maximum comfort at the lowest cost. This series uses heat pump technology to dehumidfy the space and recycle the waste energy to heat both the air and pool water. They are available in many sizes and a variety of configurations for large indoor pools found in hotels, schools, natatoriums, aquatic centers and water parks. Built for the Corrosive Pool Environment AQUA dehumidifiers have many special design features to minimize maintenance and extend the life of the unit. All critical components are located out of the corrosive air stream, and coils are constructed from all copper and coated aluminum fins for long life. AQUA uses full-size air/water condensers for maximum pool and air heating or cooling. It utilizes a sophisticated controller that offers high efficient control strategies for more efficient intelligent pool operation. All units are constructed of heavy-gauge steel with side and roof panels galvanized and epoxy powder coated to resist corrosion. Panel insulation provides additional energy efficiency along with sound control for indoor and outdoor installations. Recycled Energy Lessens the Need for Fossil Fuel Heating Indoor pools demand large quantities of heat to maintain space and water comfort conditions. Rather than relying on fossil fuel as the primary heat source, AQUA units utilize waste heat generated during dehumidification to heat the space and pool water. AQUA units return much more energy than they use with average recorded savings ranging from 40% to 60% over conventional outside air dilution systems. For every kilowatt of electrical power used to operate AQUA system, five kilowatts of heat are delivered to the natatorium and water.riendly interface – Self diagnosis -
• Clear Windows, Dry Walls: No more foggy windows or condensation on walls in the pool room with AQUA dehumidifiers preserve the construction integrity and gives a pleasant feeling to the room occupants. • Simple Installation: Can be free standing or remote. It is also duct ready, the control can be easily made in a 220 volts wiring. • Quality Construction & Reliability: AQUA dehumidifier comes in white coated antihumidity paint or in stainless steel body, Digital LCD controller & gas pressure gauge. The unit is covered under a 5 year warrantee. • Low Electrical Cost: AQUA dehumidifier utilizes a refrigeration system that requires a smaller electrical load. • Humidity Control: Stabilize room conditions through dehumidification, this reduces the maintenance cost of the room and gives a very pleasant environment to the pool room. • Indoor Pool Room Heating: Recovering energy from the dehumidification process will often heat an entire pool room for the cost of operating the dehumidifier alone. • Indoor Pool Room Cooling: An optional remote condenser will allow the DCA system to cool the pool room during the warm months. • Easy to Maintain: The AQUA dehumidifier system is a closed loop system with nothing to oil or lubricate. Simple return air filter maintenance is all that is needed.
Call Us Today! 050-1023878 & 050-2456508|INFO@PEARLPOOL.AE
